SHENZHEN KXIND COMMUNICATIONS CO.,LTD
SHENZHEN KEXINT CO.,LTD
Add to Cart
Description
The optical fiber fusion splicer is mainly used for the construction and maintenance of optical cables in optical communication, so it is also called the optical fiber fusion splicer. The general working principle is to use a high-voltage arc to melt the two fiber sections while gently advancing with two high-precision motion mechanisms to fuse the two fibers into one to achieve the coupling of the fiber mode field.
| Fiber Optical Fusion Splicer OFS-800 | |
| Specification | |
| Applicable Fibers | SM, MM, NZ-DS, EDF |
| Average Splice Loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) |
| Fiber aligning method | Core alignment |
| Splicing time | Typical 8 sec, with standard SM fiber |
| Heating time | Typical 30s |
| Electrode life | 2500 |
| Battery capacity | Typical 200 cycles (splice and heat) |
| Monitor | 5 inch color LCD |
| Storage of splice result | 8000 results |
| Tension Test | 2.0N (200gf) (Standard) |
| Splicing Mode | Manual, Half Auto, Auto |
| Protection Sleeve Length | 40mm, 60mm or others |
| Environmental Conditions | -10~+50℃(operation temperature), 0~95% RH(humidity), 0~5000m(altitude) |
| Power Supply | AC input: 100~240V, 50/60Hz; DC output: 13.5V/4.5A |
| Dimensions | 155 * 158 * 135 |
| Weight | 1.98kg |
Fiber fusion splicers are mainly used in:
Construction, maintenance and emergency repair of optical cable lines for telecom operators, communication engineering companies and public institutions;
Experiment, production and testing of optical devices;
research;
Teaching research on optical fiber communication in major universities.
