SHENZHEN KXIND COMMUNICATIONS CO.,LTD
SHENZHEN KEXINT CO.,LTD
Add to Cart
FTTH Outdoor High Strength Fiber Optic Patch Cord G657B3 3.0 Kevlar TPU Simple Construction
Introduction
Simplex cable uses single tight buffer fiber as optical communication medium, tight buffer fiber wrapped with a layer of aramid yarns as strength member and the cable is completed with TPU jacket.
Product Introduction
The ultra bending insensitive single-mode optical fiber BendCom® G.657.B3 has outstanding bending performance, especially at 5 mm bending radius. The refractive index profile distribution is optimized so that the fiber can be fully compatible with G.657.A2 fiber, making it the best product for fiber-to-the-home (FTTH).
Application Scenarios
1 FTTH
2 Home application scenarios such as invisible fiber optic cable
3 For occasions with special requirements to bending radius
Features:
1. Simple structure,light weight and high tensile strength.
2. Special groove design,easily strip and splice, simplified installation and maintenance.
3. Two parallel steel wires ensure tensile.
4. Crush resistance and flexibility.
5. Low smoke zero halogen and flame retardant sheath, environment-friendly and good security.
Optical fiber type and properties
G657B3 Characteristic of Optical Fiber
| ITEM | Unit | Specification | |
| G. 657B3 | |||
| Mode field diameter | 1310nm | mm | 9.2 ± 0.4 |
| 1550nm | mm | 10.4 ± 0.5 | |
| Cladding diameter | mm | 125.0 ± 0.7 | |
| Cladding non-circularity | % | ≤1.0 | |
| Core concentricity error | mm | ≤0.5 | |
| Coating diameter | mm | 242 ± 7 | |
| Coating/cladding concentricity error | mm | ≤12 | |
| Cable cut-off wavelength | nm | ≤1260 | |
| Attenuation Coefficient | 1310nm | dB/km | ≤0.35 |
| 1383 nm | dB/km | ≤0.33 | |
| 1550nm | dB/km | ≤0.21 | |
| 1625 nm | dB/km | ≤0.23 | |
| Proof stress level | kpsi | ≥100 | |
Other parameters meet standard ITU-T G.657.B3
Cable structure and parameter
| Item | Contents | Unit | Value |
| Optical Fiber | / | / | 1 |
| Tight buffer fiber | Diameter | mm | 0.9±0.05 |
| Material | / | LSZH | |
| Filler | Material | / | Aramid yarns |
| Outer jacket | Diameter | mm | 3.0±0.1 |
| Material | / | TPU | |
| Color | / | Black | |
| Tensile performance | Short term | N | 500 |
| Long term | N | 200 | |
| Crush | Short term | N/100mm | 500 |
| Long term | N/100mm | 100 | |
| Cable attenuation | dB/km | SM: ≦ 0.4 at 1310nm, ≦ 0.3 at 1550nm | |
| Cable weight (Approx.) | kg/km | 8.2 | |
Special Designation
| Type | Standard,Master |
| Style | LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC |
| Fiber | Singlemode/Multimode |
| 50/125, 62.5/125 (Multimode) OM2&OM1 | |
| 50/125, 10G (Multimode) OM3 | |
| Cable | Simplex, Duplex |
| Φ3.0mm, Φ2.0mm, Φ0.9mm | |
| PVC or LSZH | |
| Polishing Manner | UPC,SPC,APC (8°& 6°) |
| Insertion Loss | ≤ 0.1dB (For Singlemode Master) |
| ≤ 0.25dB (For Singlemode Standard) | |
| ≤ 0.25dB (For Multimode) | |
| Tested by JDS | |
| Return Loss (Singlemode) | UPC ≥ 50dB |
| SPC ≥ 55dB | |
| APC ≥ 60dB (typ.65dB) | |
| Tested by JDS | |
| Repeatability | ±0.1dB |
| Operating temperature | -400C to 850C |
| Geometry Requirement ( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) | |
| 10mm ≤ R ≤ 25mm (For Standard) | |
| Apex Offset ≤ 30 μm (For Master) | |
| Apex Offset ≤ 50 μm (For Standard) | |
| Undercut -50nm ≤ U ≤ 50nm | |
| Tested by DORC | |
| Geometry Requirement ( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) | |
| 10mm ≤ R ≤ 25mm (For Standard) | |
| Apex Offset ≤ 30 μm (For Master) | |
| Apex Offset ≤ 50 μm (For Standard) | |
| Undercut -50nm ≤ U ≤ 50nm | |
| Tested by DORC |
Color of connector
PACKING:
1 Nominal shipping length of the cable will be 1~3 km. Other length is also available if required by buyer.
2 Each length of the cable will be wound on a separate strong wooden.
3 Both ends of the cable will be sealed with a suitable heat shrinkable cap to prevent the entry of moisture during transportation and storage.
4 The cable end will be securely fastened to the drum to prevent the cable from coming loose during transit or becoming loose during placing operations.
5 Circumference battens will be secured between the outer edges of the flange to protect the cable against damage during shipment and storage.
6 For testing purposes, the inner end of the cable will be recessed into a slot in the drum flange . A minimum length of one meter of cable at the inner end will be accessible.
7 The cable will be shipped on drums designed to prevent damage to the cable during shipment and installation
8 The minimum barrel diameter of the drum will be 30 times to the overall cable diameter.