The MPO One-click Cleaner is a high-performance device designed for cleaning the ferrule end-faces of MPO & MTP connectors. Cost effective tool for cleaning fiber end-faces without the use of alcohol. It saves time by effectively cleaning all 12 fibers at once. The MPO connector cleaner is designed to clean both exposed jumper ends and connectors in Adapters. Effective on a variety of contaminates including dust and oils.
 
The MPO One-click Cleaner is dry cloth cleaners specially designed to clean single connector residing in an adapter, faceplate or bulkhead. They are simple to use and highly effective at removing oil and dust contaminants. That can negatively impact optical performance.

 
Feature: 
 
* Easy one-handed operation 
 
* 600+ cleanings per unit 
 
* Clean ferrules with or without guide pins 
 
* Narrow design reaches tightly spaced MPO adapters 
 
* Intermateability with FOCIS-5 (MPO) 
 
Application: 
 
* Clean multimode and single-mode (angled) MPO/MTP connectors 
 
* Clean MPO/MTP connectors in adapter 
 
* Clean exposed MPO/MTP ferrules 
 
* Great addition to cleaning kits

 
Necessity of cleaning
  
For high-speed optical transfer and WDM,there is more and more energy of over 1W output power from laser LD.How is it going if there exits pollution and dust on the end face ?
* Fiber may fuse because of pollution and dust heating. (It is limited that the fiber connectors and adapters should suffer over 75 ℃.
  
* It can cause damage to the laser equipment and influence the communication system because of light reflex (OTDR is very
 sensitive).
 
 Effect of dust heating by high-energy laser :
  
* Burn the fiber stub
  
* Fuse the surrounding of fiber stub
  
* Melt the surrounding metal powder of fiber stub

 
Comparison:

Tools	Optic fiber stick and Electronic optic fiber cleaner	Non-woven fabrics (Clothes or towel) and cotton Ball rod	High pressure gas
Reasons of undesired effects	1.Though it is good at the first cleaning,there is secondary pollution after repeated use. (Secondary pollution is avoided by our CLEP because the cleaning part will be updated after use) 2.High cost	1.It is not suitable for the final cleaning because of the depilation.It may cause of failure. 2.The Metal powder and dust will cause damage to the fiber end face	1.It is good for the floating dust at a non-contact method. However there is little effect to the backlog dust. 2.There is little effect to the oil

KEXINT MPO One Click Cleaner Pen Type Optical Fiber Connector Cleaner

Fiber Optic Armoured Cable

Fiber Optical Patch Cord

Fiber Optic Distribution Box

Fiber Optic PLC Splitter

Fiber Optic Quick Connector

Rack Fiber Patch Panel

Fiber Optic Closure

MTP MPO Patch Cord

Copper Lan Cable

GEPON OLT

GEPON ONU

Fiber Optic SFP Module

Optical WDM

Fiber Optic Attenuator

Fiber Optic Adapters

Fiber Optic Tools

Fiber Optic Cable

KEXINT MPO One Click Cleaner Pen Type Optical Fiber Connector Cleaner

optical connector cleaner

optical fiber connector cleaner

fiber connector cleaner